255/35R18
Detailed dimensional measurements, rolling circumference, revolutions per mile, and compatible alternative sizing options for 255/35R18.
Understanding Tire Size Markings
Every standardized metric tire specification encodes four critical engineering parameters into a single standardized code.
Section Width (Millimeters)
The linear distance in millimeters from the widest point of the outer sidewall to the inner sidewall when mounted on a measuring rim at specified inflation pressure.
Aspect Ratio (Profile %)
The dimensional ratio of sidewall height to section width expressed as a percentage. In 205/55, sidewall height is 55% of 205 mm = 112.75 mm.
Internal Construction (Radial)
Indicates radial ply internal casing construction where steel and fabric cords run perpendicular (90 degrees) to the direction of travel for optimal traction and longevity.
Rim Diameter (Inches)
The nominal diameter of the wheel in inches from bead seat to bead seat that the tire is engineered to be mounted on (16" = 406.4 mm).
Specialized Tire & Wheel Tools
Tire Size Calculator
Calculate comprehensive measurements and rolling specs for any individual tire.
Tire Size Comparison
Side-by-side dimensional comparison between two tire setups with visual delta.
Tire Diameter Calculator
Find overall diameter and ground clearance differences between profiles.
Tire Circumference Calculator
Calculate rolling distance and revolutions per mile/km for odometer checks.
Speedometer Calculator
Calculate speed reading variances caused by tire diameter changes across speeds.
Tire Size Chart
Explore 70+ common automotive tire sizes, specs, and standard applications.
Automotive Fitment & Safety Advisory
Calculations presented on TireSizeChecker.com are nominal mathematical projections. Actual installed rolling dimensions fluctuate depending on rim width matching, tire manufacturing tolerances (TRA/ETRTO standards), pneumatic inflation pressure, dynamic speed expansion, and vehicle cornering loads.
Always verify mechanical suspension clearance, brake caliper clearance, wheel fender lip clearance, speedometer recalibration, and load/speed ratings with a certified tire technician before mounting non-OEM tire sizes.